InterM DSA-100DV Dual Channel Power Amplifier 2 x 100watts 4ohm-100volt

Description

interM    NEW
Dual Channel Power Amplifier    2 x 100watts ÷ 4Ω/100volt

Overview
The DSA Series is a amplifier 4ohm/70/100v capable of delivering a total 100 watts x 2 of Power is housed in half rack 1 RU compact chassis, this Class D amplifiers offer High power in reduced size and weight.
The combination Class D type amplification circuitry combined with SMPS (Switch mode Power Supplies) creates a high efficiency amplifier offering reduced power consumption and low heat dissipation.
The DSA-Series is a low impedance stereo amplifier and can deliver high impedance 70/100v output using the optional OPT-100 transformer.
Ideal for applications where high power stereo amplification is required such as board room and class rooms.

Energy star rated
VCA control
Remote "Power ON closure"
Auto shutdown after 30 minutes
HPF
Channels can be bridged
Rack mount bracket available
240voltAC 

CLASS D
Class D audio amplifier offer greater power efficiency over traditional amplifiers.
Among their advantages is their reduced physical size and lower heat dissipation.
They offer less than 1% THD, total harmonic distortion with an increased signal to noise ratio to 90db and a widened frequency response from 30Hz ~ 18 KHz
Class D audio amplifier offers greater than 90% power efficiency over traditional amplifiers.
SMPS - Switch mode power supply provides high efficiency and low weigh.
Among their advantages is their reduced physical size and lower heat dissipation.
The DPA series is fully equipped with a protection circuit against short circuit, overload, power and DC output.
They offer less than 1% THD, total harmonic distortion with an increased signal to noise ratio to 90db and a widened frequency response from 30Hz ~ 18 KHz.
Hi Definition sound is achieved by using high impedance matching transformer and noise cancelling balance audio input.
The total harmonic distortion is reduced to less than 0.1% THD, with a high signal to noise S /N ratio of over 100dB with optimum broadband frequency response of 65Hz ~ 20kHz.

LCF (Low Cut Filter)
A Low Cut Filter helps to improve speech intelligibility and protects output from unwanted low frequencies.

Applications
Commercial Audio, A/V and Multimedia Solutions